SP530A
2-WAY DELF POWERED LOUDSPEAKER SYSTEM
2-Way loudspeaker system provides high output, low distortion sound reinforcement for the entire range of pro audio applications.
| Speaker Power Capability • 1120 W (EIAJ) - 4 Ohms • 2240 W (PEAK) - 4 Ohms |
Coverage • Horizontal 90° • Vertical 40° |
Sensitivity (98dB 1 Watt @ 1 m) 128 dB Max SPL (EIAJ) calc. 132 dB Max SPL (PEAK) calc. |
The 320 mm (12”) low frequency cone and 100 mm (4”) voice coil and 44 mm (1.75”) voice coil high frequency compression driver provides higher output and lower distortion plus enhanced power handling capabilities for better performance in both portable and permanently installed applications. The digital amplifier with DSP controller permit the pilotage in Bi-Amp mode of the speakers.
APPLICATION
The SP530A was designed to support a wide range of pro audio applications. While ideal for distributed systems, the 13° per side trapezoid angles match the 90° horizontal coverage pattern allowing the creation of tight packed clusters. The pole mount cup and balance-optimized handles allow for quick and easy load-in for portable use. Its high output capabilities let it act as a main system for smaller concert or portable A/V events or even provide front or side fill for concert touring applications. The comprehensive system mounting points allow safe suspension in permanent installations.
- 12" LF in Vented Enclosure
- 1.75" Compression Driver with Horn
- Fly Mounting Points and Pole mount Cup Included
- Powering Mode: Bi-Amp with Digital Amplifier 750 W + 370 W
- For Portable or Permanent Installation
PHISYCAL
Dimensions mm (±1 mm)
• Height 590
• Front Width 390
• Rear Width 195
• Depth 395
• Trapezoid angles (degrees) 13° per side
Weights Kilograms
• Net Weight 22
• Shipping Weight 24
• System Configuration Two-way full range
Enclosure Material
• Enclosure material Birch Plywood of 18mm
• Finish Texture poliuretanic black paint
• Suspension 6 point mounting suspension
• Grille Poweder coated perforated steel
• Connectors:Neutrik XLR In & Out + AC Power: 240V, Powercon In & Out
• Optional Accessories Fly clip with ring, Speaker soft bag
• Height 590
• Front Width 390
• Rear Width 195
• Depth 395
• Trapezoid angles (degrees) 13° per side
Weights Kilograms
• Net Weight 22
• Shipping Weight 24
• System Configuration Two-way full range
Enclosure Material
• Enclosure material Birch Plywood of 18mm
• Finish Texture poliuretanic black paint
• Suspension 6 point mounting suspension
• Grille Poweder coated perforated steel
• Connectors:Neutrik XLR In & Out + AC Power: 240V, Powercon In & Out
• Optional Accessories Fly clip with ring, Speaker soft bag
PERFORMANCE
Frequency Response
• ±5 dB 55Hz to 18KHz
• -10 dB 40Hz
Sensitivity (dB 1Watt @ 1 m)
• Full Range Passive 98dB
• LF 98dB
• HF 106dB
Max SPL Calculated
• 128 dB
Nominal Input Impedance (Ohms)
• Full Range 4
Power Handling (Watts EIAJ)
• LF 750
• HF 370
Nominal Dispersion (degrees @ - 6 dB)
• Horizontal 90°
• Vertical 40°
ADDITIONAL_DATA
Product Series SP
• LF Subsystem & Loading One 320 mm (12") woofer vented
• HF Subsystem & Loading One 100 mm (4") exit/44 mm (1.75") voice coil Titanium/Neodymium
• Operating Mode Bi-Amp with Digital Amplifier 750 W + 370 W
• ±5 dB 55Hz to 18KHz
• -10 dB 40Hz
Sensitivity (dB 1Watt @ 1 m)
• Full Range Passive 98dB
• LF 98dB
• HF 106dB
Max SPL Calculated
• 128 dB
Nominal Input Impedance (Ohms)
• Full Range 4
Power Handling (Watts EIAJ)
• LF 750
• HF 370
Nominal Dispersion (degrees @ - 6 dB)
• Horizontal 90°
• Vertical 40°
ADDITIONAL_DATA
Product Series SP
• LF Subsystem & Loading One 320 mm (12") woofer vented
• HF Subsystem & Loading One 100 mm (4") exit/44 mm (1.75") voice coil Titanium/Neodymium
• Operating Mode Bi-Amp with Digital Amplifier 750 W + 370 W
RELATED PRODUCTS
• PSUB1V1
• PSUB3V2
• PSUB3V2
